VISSIM 5.30-05 User Manual

Menu bar
File
selection
Distributions
► In the PANEL OPTIONS menu, you may check or uncheck the display of the
V3DM attribute panels one by one or all at once:
- DIMENSIONS
- STATES
- DETAILS
- LODS (LEVELS OF DETAIL)
- TEXTURES
When UNCHECK ALL is clicked, the Preview window will appear next to the
navigator tree, since the sections in the middle are faded out. Closing the
window will reset the Select 3D Model window view to the default
settings.
► In the VIEW OPTIONS menu, you may check or uncheck the display of the
auxiliary view components known from V3DM one by one or all at once:
- AXLE PLACEMENT
- JOINT PLACEMENT
- SHAFT LENGTH
- DISPLAY GROUND
Additionally, the LOCK LEVEL OF DETAIL command is provided.
Beneath the menu bar, the path of the currently selected model file is
displayed.
The two buttons on top of the navigator tree allow for general path selection.
Subsequently, select the appropriate *.V3D file in the list of files underneath.
► Click the CURRENT PROJECT button to open the project folder of the
currently loaded *.INP file.
► Click the STANDARD 3D MODELS button to open the 3DMODELS folder
which is provided in the EXE folder of your VISSIM installation. The 3D
models provided with the VISSIM installation are stored in the following
sub-folders:
- STATIC
- TEXTURES
- VEHICLES
All *.V3D files provided via the selected path are listed in the window section
underneath and can be displayed in the Preview section after selection from
the list of files.
User Manual © PTV AG 2011 117