VISSIM 5.30-05 User Manual

11 Evaluation Types for Simulations of Vehicles
► Table with the queue data measured for each counter and time interval.
It contains the following information for each queue counter (3 columns)
and each time interval (one line):
Parameter Definition Column
Average
queue length
Maximum
queue length
Number of
stops
Example (*.STZ file)
Queue Length Record
Calculation method: The current queue length is
measured upstream every time step. From
these values the arithmetical average is
computed for every time interval.
Calculation method: The current queue length is
measured upstream every time step. From
these values the maximum is computed for
every time interval.
Number of stops within queue: Total number of
events when a vehicle enters the queue
condition.
File: e:\programfiles\PTV_Vision\VISSIM520\Examples\example.inp
Comment: Manual Example
Date: Wednesday, May 2, 2009, 5:31:39 pm
VISSIM: 5.20-00 [19895]
Queue Counter 520: Link 247 At 66.200 ft
Queue Counter 531: Link 241 At 18.600 ft
Queue Counter 532: Link 243 At 18.795 ft
Queue Counter 534: Link 242 At 46.900 ft
Avg.: average queue length [ft] within time interval
Max.: maximum queue length [ft] within time interval
Stop: number of stops within queue
Time; Avg.; max.;Stop; Avg.; max.;Stop; Avg.; max.;Stop; Avg.; max.;Stop;
No.:; 520; 520; 520; 531; 531; 531; 532; 532; 532; 534; 534; 534;
600; 12; 32; 15; 10; 73; 72; 12; 73; 51; 2; 13; 6;
1200; 12; 52; 19; 5; 37; 58; 7; 49; 34; 2; 20; 7;
1800; 17; 45; 12; 4; 36; 43; 7; 73; 36; 1; 7; 2;
510 VISSIM 5.30-05 © PTV AG 2011
Avg
max
Stop