VISSIM 5.30-05 User Manual

6 The Traffic Network
► Right turn on red: Option Only on Red has to be checked. Then, the
STOP sign becomes active only while the allocated signal group shows
red.
► Dispatch counters (e.g. customs, road toll etc.): Option Use time distribution
has to be checked. Then, vehicles will stop as long as preset by the
assigned time distribution (to be defined via BASE DATA – DISTRIBUTIONS –
DWELL TIME...).
6.6.3.1 Creating
1. Select the Stop Signs mode.
2. Select the link on which vehicles will have to stop.
3. With a right click, define the location on the selected link where vehicles
should stop (stop line).
4. Edit the stop sign properties.
5. Confirm with Ok.
6.6.3.2 Properties & Options
The properties of a stop sign can be accessed by selecting the
corresponding link/connector and double-clicking on the stop sign marker.
● No.: Unique identification of the
stop sign
● Name: Label or comment
[POSITION]
● Lane: Defines the lane number
where the marker is placed.
● At: Link/connector coordinate of the
marker.
● Label: When showing labels
(names) of all stop signs (cf. VIEW -
NETWORK ELEMENTS...) this option
allows to individually switch off the
label of that stop sign.
278 VISSIM 5.30-05 © PTV AG 2011