VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
2. Click the Measurement Areas icon.
Follow the steps outlined in the status bar for measurement area definition.
Right-click in the network calls the list of defined measurement areas:
Measurement areas are only displayed, if the Measurement Areas mode is
active.
As 3D display has no modes, there is currently no way to see
measurement areas in 3D display.
To gain correct output data, please check the assigned level by measurement
area and adjust it accordingly in this grid.
A visual check for correct placement on the levels can be done in 2D
display using the level display option, cf. section 7.1.4.6.
Configuration
Call the Area Evaluations window as follows:
1. Click menu EVALUATION – FILES and select the [PEDESTRIANS] tab
2. Check option Area evaluation
3. Click the CONFIGURATION button
Additional settings are required for the desired data output and data format:
● EvaluationNo. (Areas):
List of defined area
evalulations (with the
area numbers in
parentheses).
● Click NEW to define a
new evalulation.
● Click EDIT for changes
to an existing one.
402 VISSIM 5.30-05 © PTV AG 2011