VISSIM 5.30-05 User Manual

6 The Traffic Network
A routing decision of the Managed Lanes type needs to be complete.
Otherwise it is ignored in the simulation. Both a route of the Managed type
and a route of the General purpose type are required. Furthermore, a
managed lane facility with user-defined toll pricing calculation model and
decision model needs to be allocated.
To define further destinations (multiple routes) from the same routing
decision point (red bar), follow the steps outlined below:
► Select the next destination link immediately.
► Right-click the position of the next destination cross-section (or parking
lot).
This has to be done for each additional route starting from the currently
active decision cross-section.
To define a new routing decision, deselect all links by double-clicking in the
network and repeat steps 1 to 4.
In the Routes window, the following settings are required:
► Set the time intervals by routing decision type.
► Select appropriate Vehicle class(es) by routing decision.
6.4.4.2 The Routes Window Structure
As this is a mode-less dialog you may navigate or zoom in/out the network
display though the window is open.
218 VISSIM 5.30-05 © PTV AG 2011