VISSIM 5.30-05 User Manual

6 The Traffic Network
Via the context menu, create a NEW time interval, or DELETE the marked time
interval.
Create or edit a daily signal program list:
● Name: Name of the daily signal program list (optional).
● Time: Select the instant (in hh:mm:ss format), when the time interval
starts during which the allocated signal program is valid:
Mark either hh or mm or ss and use the arrow keys UP (along the time
axis) or DOWN (reverse direction).
If the daily signal program list does not cover the whole day, then add the
final instant to the end of the list and allocate No Signal Program for the
rest of the day. For the interval from midnight until the first time entry,
VISSIM automatically assumes No Signal Program.
● Signal Program: In the selection list, pick the signal program which is to
be regarded during the particular time interval. Signal programs of either
type (stage-based or signal group-based) can be selected for daily signal
program lists.
● Notes: Comment on the daily signal program list (optional).
If the change from one signal program to the next is marked by a red dot,
the switch point between the two has to be adjusted. Edit one of the signal
programs or both, if applicable, so that the states of the two signal
programs are coordinated for the change.
328 VISSIM 5.30-05 © PTV AG 2011