VISSIM 5.30-05 User Manual

Combine
static
routes
Automobile Traffic
For static routes ending on a link where another static routing decision is
located, the combination of those routes can be triggered as follows:
1. Click on the routing decision
2. Click menu EDIT - COMBINE STATIC ROUTES
All routes starting from this decision are appended to all routes ending
upstream of this routing decision on the same link. This includes the
following steps:
► Deleting the selected routing decision and all destination cross-sections
originally ending upstream of this decision.
► Forming the maximum number of new routes from each routing
decision originally leading to the deleted decision cross-section to each
destination cross-section of the deleted routing decision.
► Distributing the given total relative volumes to the resulting routes.
Only static routes and routing decisions with identical time intervals and
identical vehicle class selection can be combined.
All routes that can be combined are highlighted in the network and a
confirmation message box appears. In the Routes list, this max. number of
routes can be reduced by the user (DELETE).
Example Combining static routes will change data accordingly:
From the example settings in the Routes window the elements placed on
link 180 can be seen:
► The common destination cross-section of 3 routing decisions (no. 22,
24, 26)
► The routing decision (no. 33) with 2 routes starting from it.
User Manual © PTV AG 2011 223