VISSIM 5.30-05 User Manual

Signal Controllers
- CLASSICAL
- 3D TUBES
- 3D BOXES
● RESIZE AUTOMATICALLY: In case of changes to the window height the data
row height is adjusted automatically.
● SHOW ENTIRE SIGNAL PROGRAM: Redraws the interstage and adjusts the
data row height to the window height.
The properties of the selected interstage can be edited:
● Name: The name is taken from the stage sequence selected via Stage
sequence editing in the navigator, cf. section 6.7.4.5. This name is
subject to changes.
● From stage: In the list, another origin stage can be selected. Selecting a
new stage automatically starts the recalculation of the interstage.
● To stage: In the list, another target stage can be selected. Selecting a
new stage automatically starts the recalculation of the interstage.
Appropriate origin or target stages are indicated by the following colors in
the selection list:
User Manual © PTV AG 2011 325