VISSIM 5.30-05 User Manual

11 Evaluation Types for Simulations of Vehicles
11.13 Network Performance Evaluation
Network Performance Evaluation evaluates several parameters that are
aggregated for the whole simulation run and the whole network to an *.NPE
file.
Definition
No additional definition required.
Configuration
In order to get the desired output data additional information is needed. This
is to be provided within the Network Evaluation - Configuration window that is
accessible by pressing the CONFIGURATION button in EVALUATION – FILES… -
[VEHICLES], once the option Network Performance is ticked. The window
allows for definition of data to be evaluated by a node evaluation.
It contains the following lists:
► Selected
Parameters
(use buttons
and to
add/remove a
selected parameter)
► Available
parameters
(Parameter
Selection)
and
► Vehicle Class
(enabled only
for some parameters).
Use the buttons UP and DOWN to arrange the entries (columns in data file).
The selected parameters will be saved to a network performance evaluation
configuration file (*.NPC).
Scheduled stops at PT stops and stops in parking lots are counted as stops.
Passenger transfer times and dwell times at STOP signs and the times spent
parking are counted as delays.
546 VISSIM 5.30-05 © PTV AG 2011