VISSIM 5.30-05 User Manual

Important Notice to Users of Previous VISSIM Versions
Thus it is no longer possible to shift a keyframe to another position within the
list and to retain the movement times and dwell times simultaneously. You
may not enter a new start time which is before the end of the dwell time of
the previous keyframe.
For Fixed time control, the Signal program Editor replaces the previous
tabular data supply for SC of that type. All fixed time controllers are now
handled as external (VISSIG) controllers. Hence the controller data is not
stored in the *.INP file anymore but in a separate *.SIG file for each
controller. Please keep that in mind if you transfer VISSIM project data to
another location or client.
Versions Previous to 5.10
In addition to link-based vehicle traffic VISSIM now includes an area-based,
multi-level pedestrian behavior model (optional module). Its main advantage
is its capability to model walkable areas and ramps as well as obstacles
rather than directional links/connectors. Thus pedestrians are able to move in
all directions including counter-flow situations.
To automatically multi-select all links/connectors of any display type or
behavior type, the new function MULTI-SELECT IN NETWORK is available in the
context menu of the list of all display types and behavior types respectively.
The *.BEW and *.WEG files are no longer necessarily overwritten during a
(Multirun) Simulation, since existing output files can be saved to archive now.
VISSIM provides complete unicode support for filenames.
Versions Previous to 5.00
Link types are now split into link behavior types and link display types. This
allows to handle the graphical display of a group of links independently of the
driving behavior. Link display types have several new attributes for 3D
display.
18 VISSIM 5.30-05 © PTV AG 2011