VISSIM 5.30-05 User Manual

4 View Settings
These attributes are available:
- None
- Lane closure (at least one closure to at least one vehicle class)
- Gradient (different from 0)
- Link evaluation (active)
- Cost/Surcharge (at least one value different from 0)
- Connector closure (to at least one vehicle class)
● Bitmap Display: Changes the appearance of a background bitmap image
in 2D display. The options are
- More Black (emphasis on black pixels)
- More White (emphasis on white pixels)
- Best for colors (calculating average colors)
● 3D Background Resolution: User-selectable maximum resolution for
background images in 3D (raster and vector graphics). The maximum resolution
for correct display of background images in 3D depends on the
graphics hardware in the computer and on the number of images loaded
at the same time.
Options:
- Lowest (1024)
- Low (2048)
- Medium (4096)
- High (8192)
- Tiles: If this option has been selected, the image is loaded tile by tile.
The width (W) and height (H) of the tiles have to be entered as Tile
Size.
This option is recommended for large networks, if also large
background images are used. Opening these image files may take
some time due to file size - especially in 3D graphics mode.
A background file being read from file in VISSIM appears as tiles on
screen. While the tiles are being drawn in 3D mode, you may edit the
current window section. As long as the image has not been loaded
completely, the entire network is displayed on screen. Subsequently, the
user-defined window section that was displayed before loading the image
file will be displayed again.
70 VISSIM 5.30-05 © PTV AG 2011