VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
All changes in the Vehicle Inputs window can be undone by pressing
CANCEL instead of OK to close the window.
7.1.7.2 Properties & Options
Cf. section 7.1.7.1 on how to open the Pedestrian Inputs window and how to
edit the Time section.
This section describes the properties and options for the Volumes/Compositions
section.
● Area Number & Area Name: Refers to the area where the input of
pedestrians is placed. Values can be selected from the list of all areas
either by no. or (optional) name of the area.
● Input Name: Optional name of the input of pedestrians. Refers to all data
entered for the same area.
● Show Label: Not used.
Each of the following columns (one per time interval) contains - per area/input
- the pair(s) consisting of flow of pedestrians data and composition of
pedestrians data.
● Column Header: Shows start time and end time of the interval (in
simulation seconds). The columns are created automatically from the list
of time intervals in the Time Interval section (for more or different time
intervals, please refer to “Add new interval” in the “Time Intervals” section
above).
370 VISSIM 5.30-05 © PTV AG 2011