VISSIM 5.30-05 User Manual

New
Interval
Delete
Interval
Edit
Interval
New
vehicle
group
Analyzer Report
1. Make sure, that the option Set values or All: has been unchecked.
Otherwise you cannot define a time interval by report but just the Global
one.
2. In the desired report, select the Time entry.
3. In the window to the right, right-click to call the context menu: Select
NEW.
4. Enter the time span for network data output.
5. Confirm OK.
The new interval appears in the window to the right.
1. Mark the desired interval.
2. In the context menu, select DELETE.
1. Mark the desired interval.
2. In the context menu, select EDIT.
Vehicle group filters
In the Movement Group Delay filter you can define a Vehicle group filter for
this report.
For vehicle group definition, you need to uncheck the option Set values or
All. in the Movement Group Delay filter first.
1. Make sure, that the option Set values or All: has been unchecked.
Otherwise you cannot define a new vehicle group.
2. In the Movement Group Delay filter, select the Vehicle group entry.
3. In the window in the middle, right-click to call the context menu: Select
NEW.
4. In the Enter group name window, enter the name.
5. Confirm OK.
6. In the window to the right, left-click while holding CTRL down to select the
desired vehicle types.
User Manual © PTV AG 2011 575