VISSIM 5.30-05 User Manual

11.7 Vehicle Record
Vehicle Record
Similar to the display of vehicle information in a window any combination of
vehicle parameters can be saved to an output file. The evaluation can be
limited to a user-defined time interval as well as to selected vehicles.
Definition
No additional definition required.
Configuration
In order to get the desired output data additional information is needed. This
is to be provided within the Vehicle Record - Configuration window which can
be accessed by pressing the CONFIGURATION button in EVALUATION – FILES…
once the option Vehicle Record is active. The Configuration window allows
for definition of any combination of the vehicle parameters. If Database
output is not active, each layout line results in a column within the output file
(*.FZP).
The configuration settings will be saved to an external file (*.FZK).
● The Selected parameters
are displayed
in the list
box to the left. Use
the UP and DOWN
buttons to change
the sequence of
the selected data.
Additional parameters
can be
inserted and removed
by clicking
the corresponding
buttons and .
For the list of parameters provided for selection and a bief description,
please see below.
Neither scheduled stops at public transport stops nor stops in parking lots
are regarded for Number of Stops or Delay times.
Please note that some parameters will only report correct results if the
corresponding optional module (such as Dynamic Assignment, Cold
Emission etc.) is installed.
User Manual © PTV AG 2011 515