VISSIM 5.30-05 User Manual

11 Evaluation Types for Simulations of Vehicles
Each data line of these evaluation blocks refers to one time interval (e.g.
300.0; 600.0; means: from simulation second 300 to 600) and shows for
each column the number of edges resp. paths that are contained in the
corresponding class. The class boundaries are found in the header of
each block (Class from, Class to), value (Class to) belongs to the class.
Thus class from 2 to 5 for volume difference on edges means: All edges
that changed volume by more than 2 up to 5 vehicles are contained here
(in the example below the value is 7 for time interval 0 to 300).
Example (*.CVA file)
Convergence Evaluation
File: e:\programfiles\vissim520\example\manual.inp
Comment: Manual example
Date: Friday, June 20, 2009, 15:43:02
VISSIM: 5.20-00 [19895]
TimeFrom; TimeTo; Volume Difference;
(Class from) 0; 2; 5; 10; 25; 50; 100; 250; 500;
(Class to) 2; 5; 10; 25; 50; 100; 250; 500; ~;
Edges:
0.0; 300.0; 12; 7; 4; 0; 0; 0; 0; 0; 0;
300.0; 600.0; 0; 0; 7; 14; 2; 0; 0; 0; 0;
Paths:
0.0; 300.0; 12; 0; 0; 0; 0; 0; 0; 0; 0;
300.0; 600.0; 7; 2; 1; 2; 0; 0; 0; 0; 0;
TimeFrom; TimeTo; Travel Time Difference
(Class from) 0%; 10%; 20%; 30%; 40%; 50%; 60%; 70%; 80%; 90%;100%;200%;
(Class to) 10%; 20%; 30%; 40%; 50%; 60%; 70%; 80%; 90%;100%;200%; ~;
Edges:
0.0; 300.0; 20; 2; 1; 0; 0; 0; 0; 0; 0; 0; 0; 0;
300.0; 600.0; 21; 2; 0; 0; 0; 0; 0; 0; 0; 0; 0; 0;
Paths:
0.0; 300.0; 12; 0; 0; 0; 0; 0; 0; 0; 0; 0; 0; 0;
300.0; 600.0; 12; 0; 0; 0; 0; 0; 0; 0; 0; 0; 0; 0;
566 VISSIM 5.30-05 © PTV AG 2011