VISSIM 5.30-05 User Manual

10 Output of Results
10.1.1 Output to Window
Click menu EVALUATION - WINDOWS to enable the appropriate Window output.
The following options are available:
► VEHICLE INFORMATION...: Configuration
of the vehicle information
data that will be displayed when
double-clicking on a vehicle
during a simulation run.
For more details cf. section
11.6.
► PEDESTRIAN INFORMATION...:
Configuration of the pedestrian
information data that will be
displayed when double-clicking
on a pedestrian during a
simulation run.
For more details cf. section
7.2.5
► SIGNAL TIMES TABLE controls the
display of the Signal Times
Table window for each
controller individually. Inside
these windows both Detectors
and Signal Groups can either be
labeled with their Name or
Number.
For more details cf. section
11.8.
► SC/DET.RECORD... controls the
display of the Signal Control
Detector Record window for
each controller individually.
Inside these windows both
Detectors and Signal Groups
can either be labeled with their
Name or Number.
For more details cf. section
11.9.
478 VISSIM 5.30-05 © PTV AG 2011