VISSIM 5.30-05 User Manual

● The Selected parameters
are displayed
in the list
box to the left.
Use the UP and
DOWN buttons to
change the sequence
of the
selected data.
Additional parameters
can be
inserted and removed
by clicking
the corresponding
buttons and .
Evaluation Types for Simulations of Pedestrians
For the list of parameters provided for selection and a brief description,
please see below.
● Database: When active, evaluation output is directed to a database to
the specified Table Name (rather than to an ASCII text file). The table
name must not be used for any other VISSIM database evaluations. In
order to use the database output the database connection needs to be
configured, cf. section 10.1.3.
Filter
Once the pedestrian record parameters have been selected, a filter may be
applied to capture specific pedestrian classes during the simulation. This can
be accessed via EVALUATION – FILES – [PEDESTRIANS] tab by pressing the FILTER
button Once the option Pedestrian Record is active.
By default, all pedestrian classes are recorded within the simulation period.
In addition to the selection of pedestrian classes, a time interval for the
evaluation as well as the resolution of recording are to be defined. If an
integer > 1 is entered for Resolution, only one time step will be logged for the
user-defined number of time steps.
User Manual © PTV AG 2011 409