VISSIM 5.30-05 User Manual

Defined by
type
Defined by
class
Defined by PT
Line
Color distribution - - Type
Color distribution Color - Class
Color distribution - Color PT line
Color distribution Color Color Class
The 2D Graphics Mode
Displayed Color
determined by
For display of vehicles/pedestrians of a type belonging to several classes
(which not necessarily have to be mapped with colors) the color set for the
first one with color specification of those classes will be used.
4.2.2.2 Automatic Dynamic Color Mode
The following applies to the automatic dynamic color mode:
► It provides additional information on vehicle movements that can be
identified by the vehicle color.
► It can be toggled using CTRL+V whenever the VISSIM network window is
active.
► It works also in 3D display mode (as long as the color of the 3D vehicle
models is determined by VISSIM).
The following color code is used for vehicles:
Yellow Cooperative braking to allow other vehicle to change lanes
Orange Lane change desired but not yet started
Dark red Braking for own necessary lane change
Light blue Waiting for necessary lane change at the emergency stop
position for more than 6 simulation seconds
Light green Currently lane changing
Dark green Lane change finished during the last 6 simulation seconds
Bluish green Ignoring priority rules (to solve the detected gridlock)
Black Part of a priority rule gridlock situation
Dark yellow During the last 3 simulation seconds, the vehicle decided to
ignore a red signal or priority rule because its speed was
too high to stop safely before the stop line
Purple Light braking (between -1.0 to -3.0 m/s 2 )
Pink Heavy braking (below -3.0 m/s 2 )
Red Temporary lack of attention
White Vehicle is in queue condition (only if there is at least one
queue counter in the network)
Dark blue All other situations (standard)
User Manual © PTV AG 2011 79