VISSIM 5.30-05 User Manual

6 The Traffic Network
Shift
position
Edit route
alignment
Edit
listed data
► In the Routes window, edit the At property of the decision or destination
cross section. The particular link number is not subject to changes in
the lists.
► In the network, drag the selected routing decision (or destination cross
section) to another position on the same link or to any other link while
holding down left mouse-key.
A yellow band represents the current route alignment (link/connector
sequence). It can be changed by using intermediate points to drag part of
the route on a different link/connector. In contrast to intermediate points of
links and connectors, for routes these are temporary only.
A single right mouse button click on the yellow band creates a temporary
intermediate point. This point can then be dragged onto another link using
the left mouse button. VISSIM then calculates a new link sequence via the
new intermediate point and any existing intermediate points. Intermediate
points can be removed by dragging them onto another point. This also
causes VISSIM to recalculate the link sequence.
A single left click outside the yellow band accepts the currently shown link
sequence, thus completing the modification of the route alignment.
To each of the lists in the Routes window, the following applies:
► A context menu can be called by right-click.
The following functionality is provided:
- DELETE removes the selected row,
- COPY/PASTE for data exchange, e.g. to/from *.XLS or *.DOC files.
- ZOOM changes network display scale and section to show all
network elements being currently selected in the list,
- SELECT ALL selects all of the listed routes or routing decisions.
Additionally the CHECK command can be clicked for selected routes. In
case of errors, a detailled message appears.
► Editable properties can be edited directly in selected cells.
222 VISSIM 5.30-05 © PTV AG 2011