VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
The properties of the three types are almost alike, slight differences are
described with the particular type.
7.1.4.2 The Window Structure by Construction element type
List of The list contains all construction elements of the particular element type.
elements The numbering must not be continuously ascending, since numbering of
construction elements of different types does not count separately.
The list allows for the following processing steps:
► Selecting one ore more elements of the particular type for further
processing.
► Zoom into the network.
► Deleting selected element(s) from the list.
Properties In this section, you may edit the properties of the selected element(s).
7.1.4.3 Properties & Options of Pedestrian Areas
● No.: Unique identification of the area.
● Name: Any name or comment
● Level: For an area, select one of the levels defined via VIEW - LEVEL
DISPLAY, cf. section 7.1.4.6.
● Z-Offset top: Offset (positive or negative value) along z-axis to the
particular edge for 3D display of the area. For areas, z = 0 is the ground
pedestrians walk on, cf. A in figure below.
- With Thickness > z-Offset, the walkable space rises from below zero
348 VISSIM 5.30-05 © PTV AG 2011