VISSIM 5.30-05 User Manual

4 View Settings
Sign
On Mast In the Mast Properties window, select the desired sign that is attached
directly to the mast and press EDIT SIGN.
On Arm In the Arm Properties window, select the desired sign and press EDIT SIGN.
The Sign Properties window allows for interactive changes to the sign
dimensions as well as to edit other sign properties.
Each shape consist of two parts that can be scaled independently using the
mouse:
► Border: Click on the edge of the border and drag the mouse to the
desired dimension.
► Internal area: Click inside the internal area to select it. A dashed line
indicates that the internal area is selected. Then click on its edge and
drag the mouse to its desired dimension (inside the border area).
The current scale (Width, Height) can be checked in the lower part of the
Sign Properties window.
● ID (in window title, read-only): Shows the mast, arm (if applicable) and
sign identification no.
● Shape: Geometrical form of the sign.
● Width: Length of the largest horizontal extension of the shape.
● Height: Length of the largest vertical extension of the shape.
94 VISSIM 5.30-05 © PTV AG 2011