VISSIM 5.30-05 User Manual

Appearance of a highlighted element
The Pedestrians Editor (Add-on)
The handles of the highlighted element allow for the following:
- Use the cross in the middle to move the polygon.
- Use one of the four corner points to resize the polygon.
- Use the dot on top to rotate the polygon.
- Right-click on a polygon edge to add an intermediate point.
In each case, the appearance of the cursor will change accordingly.
Zoom Press CTRL+SHIFT+Z simulaneously to place the selected element(s) in the
center of the VISSIM window. The display is scaled accordingly.
Edit data Given attribute data can be overruled in the properties section. Edit the
desired cell(s) by a direct entry or a new selection.
► Single element: The number is not subject to changes.
► Multiple elements: The property cells indicate the following in case of
different attribute values:
- Grayed-out cells indicate, that identical values are not permitted
(e.g. name).
- Empty cells indicate, that the attribute values of the marked
elements are different. These different values will be replaced by
the new entry.
Confirm changes to data by clicking APPLY instead of CLOSE in the
Construction element window for selection of other construction elements
and further changes to their properties.
Delete Select the construction element(s) and press DEL.
Move
Copy
► Place the cursor on the cross in the middle of the polygon.
The pointer appears as a cross with arrow heads.
► Left-click inside the polygon and keep the mouse-key pressed while
dragging the polygon to the desired position.
► Place the cursor on the cross in the middle of the polygon.
The pointer appears as a cross with arrow heads.
► Press CTRL.
Next to the pointer a plus sign appears.
► Shift the copy of the selected construction element(s) to the desired
position.
User Manual © PTV AG 2011 357