VISSIM 5.30-05 User Manual

Evaluation Types for Simulations of Pedestrians
The evaluation files are named automatically: The file name is the name of
the input file and the file extension is either *.RSRP for raw data or *.RSZP
for compiled data. Those files will be stored in the path where the input file is.
Inserting a new travel time measurement is done by selecting an existing
pedestrian area and inserting the start point of the device by right-click. The
start point will be marked with a red dot. Then select another pedestrian area
and insert the end point of the device by right-click again. The end point of
the device will be marked with a green dot.
After inserting a new travel time measurement device or double-clicking an
existing one, the details dialog comes up:
In contrast to properties dialogs of other network elements, all travel time
measurements have one dialog window in common: They are always shown
in tabular form.
You can edit the no. and name of the measurement and the start/end
locations.
In the Output column, you can set up the preselection for the Active travel
times list in the Configuration window.
Definition
Define a pedestrian travel time measurement as follows:
► Click the Pedestrian Traffic mode icon.
► Click the Travel Time Sections icon.
Follow the steps outlined in the status bar for pedestrian travel time
measurement definition. Generally, it can be compared to travel time
measurement for vehicles, cf. section 11.1.
Configuration
Click menu EVALUATION - FILES - [PEDESTRIANS] tab, check option Travel times
and click the CONFIGURATION button to call the Configuration window: Set
time data and select defined travel time evaluations as well as the desired
output data format.
User Manual © PTV AG 2011 399