VISSIM 5.30-05 User Manual

Filter
Set a filter with regard to time:
● from - till simulation second.
Results
A network performance evaluation file (*.NPE) contains:
► File title
► Path and name of the input file (File)
► Simulation comment (Comment)
► Date and time of the evaluation (Date)
► Version no. with Service pack no. and Build no. (VISSIM)
► Evaluated simulation time (Simulation Time)
► Data block with a line for each selected parameter.
Network Performance Evaluation
The evaluation takes the following into account:
vehicles that have left the network or reached their destination parking lot
and also vehicles still being in the network at the end of the analysis interval.
For output of emission data, the Emissions add-on is required.
Parameter name in the list
box
Parameter legend in the dialog and
notes
Number of active vehicles Number of vehicles in the network
Total number of vehicles in the network at
the end of the simulation. Does not include
the already arrived vehicles or the latent
demand (see below).
Number of arrived vehicles Number of vehicles that have left the
network
Total number of vehicles which have
already reached their destination and left
the network during the simulation.
Latent demand Number of vehicles which could not enter
the network (from vehicle inputs and
User Manual © PTV AG 2011 547