VISSIM 5.30-05 User Manual

4 View Settings
Signal Head
On Mast In the Mast Properties window, click on the desired signal head that is
attached directly to the mast and press EDIT SIGNAL.
On Arm In the Arm Properties window, click on the desired signal head and press
EDIT SIGNAL.
The Signal Properties window allows to edit the signal head properties:
● ID (in window title, readonly):
Shows the mast, arm
(if applicable) and signal
head identification no.
● Type: Due to the selected
type (Pedestrian/Bike,
Traffic or Public Transport),
various layouts are provided
for the signal head. With the
Pedestrian/Bike type, also
signals with timer can be
chosen.
● Orientation: Choose Vertical
or Horizontal orientation.
● Associated controller data:
Link to VISSIM controller
and signal group no. that
should be displayed on this
signal head. Depending on
the Layout one or more of
the direction lines Left,
Through and Right are
enabled, e.g. Left is enabled
only if the Layout contains at
least one bulb with a left
arrow.
● Layout: Number of lenses and configuration of the signal head.
92 VISSIM 5.30-05 © PTV AG 2011