VISSIM 5.30-05 User Manual

11.8 Dynamic Signal Timing Plan
Dynamic Signal Timing Plan
The Dynamic signal timing plan (signal times table) offers a graphical display
of the actual signal setting and detector occupancy. It displays green, amber
and red times graphically with a horizontal time axis.
Definition
No additional definition required.
Configuration
To create or edit a signal times table configuration, follow the steps outlined
below:
1. Select SIGNAL CONTROL - EDIT CONTROLLERS...
2. Select the controller to be edited from the list of all coded signal
controllers.
3. In the [SIGTIMTBLCFG] tab page, the data can be edited.
Add line To add a new line to the current Layout of lines table, a new entry has to be
defined as follows:
► Left-click the selected value type in the Type (Category) list.
► Specific data (e.g. SG No.) have to be selected from the neighbouring
list, if applicable.
► Add this combination to the current Layout of lines on top of the currently
marked entry via
- clicking the button or
- clicking one of the selected Type (Category) entries twice.
User Manual © PTV AG 2011 525