24.08.2013 Views

VISSIM 5.30-05 User Manual

VISSIM 5.30-05 User Manual

VISSIM 5.30-05 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

11 Evaluation Types for Simulations of Vehicles<br />

TRAVELTIMEINFO<br />

Column Description<br />

id Travel time section number<br />

Name <strong>User</strong>-defined name<br />

FromLink From link<br />

ToLink To link<br />

Distance Calculated the same way as in dialog.<br />

Set to –1.0 if not possible to calculate distance.<br />

(meter/feet according to current Units)<br />

11.24.5 Extras: Export to VISUM network file *.NET<br />

If the corresponding <strong>VISSIM</strong> network is open when you run Analyzer,<br />

Analyzer will try to export your *.INP file to a VISUM *.NET file with two extra<br />

user-defined node attributes: AnalyzerAvgDelay and AnalyzerLOS. This<br />

export, along with the LOS.GPA file that came with your <strong>VISSIM</strong> installation<br />

will allow you to graphically view the Level of Service of your selected nodes<br />

(see the example 'Analyzer' for an example graphics parameter file for use<br />

with VISUM).<br />

After creating the VISUM input file, open the network *.NET file in VISUM<br />

and open the graphics parameters (LOS.GPA) file then.<br />

588 <strong>VISSIM</strong> <strong>5.30</strong>-<strong>05</strong> © PTV AG 2011

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!