VISSIM 5.30-05 User Manual

4 View Settings
4. Confirm with OK. The Signal Properties window opens.
5. Edit the signal data (cf. section 4.3.4.3) and confirm with OK.
6. Close the Signal Head window with OK.
7. Switch on the 2D representation of the 3D signals (default shortcut
CTRL+H). The new signal can now be placed and edited (cf. below for
details).
4.3.4.2 3D Signals in the Network Display
EDIT - 3D SIGNAL HEADS (default shortcut
CTRL+H) shows the 3D signals as a 2D representation:
► Unselected 3D signal heads are displayed
as a green square with a diamond and a red
circle inside. A selected signal is painted in
dark blue in 2D, light blue in 3D mode.
► The circle represents the mast.
► Any arm is displayed as a red line indicating
the direction and length of that arm.
► Small blue arrows along the arm indicate
the signal heads.
In 2D mode, signal heads which are directly
attached to the mast are displayed as a blue
circle.
While holding the left mouse-key down, you
may drag a 3D signal head to a new
position on the mast in 2D mode.
Select Click on the green square. The selected square is painted blue.
88 VISSIM 5.30-05 © PTV AG 2011