VISSIM 5.30-05 User Manual

Click CTRL simultaneously to select multiple
areas for an area evaluation.
Evaluation Types for Simulations of Pedestrians
Alternatively, you can use the button GENERATE 1:1 for area evaluation
definition.
● GENERATE 1:1: For each single measurement area, a separate area
evaluation is created (even if the area has already been selected for
another area evaluation).
● Time: Define the evaluation period and the length of aggregation
intervals.
● Output: Select the desired data format.
- Raw data: Stores all pedestrians traversing the measurement area in
chronological order in an *.MERP file (Area evaluation raw data)
Compiled Data: Stores the selected parameters (using the selected
aggregate function (mean, min, max, if applicable) in an *.MESP file.
● CONFIGURATION: In the Area evaluation – Configuration window, the user
can select the desired parameters and arrange them in the desired order.
These settings are only regarded for Compiled data output.
The selected parameters are listed in the Layout of columns section.
- Use the buttons MOVE UP and MOVE DOWN for the final arrangement
of columns in the output file (1 st row = 1 st column).
- Use the buttons to add the selected parameter to the layout
section (and to remove it from the layout section).
User Manual © PTV AG 2011 403