VISSIM 5.30-05 User Manual

[DYNAMIC
ASSIGNMENT]
(optional
module)
[OTHER]
● Connector closed to: Allows for
modeling multi-modal networks
for the use with Dynamic
Assignment. By selecting one or
more vehicle classes in the list,
the connector is not available
for route choice of the selected
classes. Pressing CTRL while
clicking with the left mouse
button adds or removes an item
from the current selection.
● COST...: Opens a window where the cost
and surcharges of the connector can be
specified. These numbers are used by the
Dynamic Assignment to evaluate the cost of
vehicles traveling on that connector
Network Coding
● The Gradient affects acceleration
and deceleration capabilities
of all vehicles on the
connector:
- The acceleration decreases
by -0.1 m/s² per percent of
positive gradient (road
incline)
- If the gradient is negative it
increases by 0.1 m/s² per
percent.
The possible deceleration changes the opposite way.
The gradient has no visual effect in 3D graphics mode (use the Height
(3D) property to model different heights in 3D).
● EVALUATION... (relevant for Display options - [TRAFFIC], option Aggregated
values, and for Link Evaluation):
Enables/disables Segment Evaluation of that
link and defines the Segment Length. These
properties can also be set for several links
simultaneously by using the multi-select option
(cf. section 3.3.2).
6.3.2.3 Editing
The Links and Connectors mode needs to be active.
User Manual © PTV AG 2011 197