VISSIM 5.30-05 User Manual

The 3D Graphics Mode
VISSIM does not store any changes regarding fog/haze. As soon as
VISSIM is closed and reopened, haze/fog is disabled.
Adding fog/haze applies to all 3D navigation modes and all the keyframes.
Illustrations for the effects of the fog parameters
For this example, V3DM (optional
module) was used to place a sky
picture on a vertical plain. This plain
was included in VISSIM as a static
3D object. Otherwise, the fog would
not be visible above the horizon.
Scene 1: Fog front and 0-visibility front are
set to the same value: The fog appears as
a solid wall.
Scene 3: Coming from scene 1, the fog
front is moved further towards the observer
(default shortcut CTRL+F3).
Scene 0: No fog at all.
Scene 2: Coming from scene 1, the 0visibility
front is moved further away
from the observer (default shortcut
CTRL+F6)
Scene 4: Both settings from scene 2 and
scene 3 are combined here.
User Manual © PTV AG 2011 99