VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
List of
routes or
partial
routes, as
applicable
The list contains:
► all (partial) routes starting from decisions which are currently selected in
the list of pedestrian routing decisions.
Due to the particular routing decision type it contains also the following
details, if applicable:
► all time intervals (columns) resulting from time settings, and
► the user-defined amount of pedestrians as share of 100% per route and
time interval.
This section allows for the following:
► Editing the properties of the selected routes or partial routes,
► Deleting the selected (partial) routes from the list.
For Sorting & Filter options provided in the list of routing decisions and in the
list of routes, please cf. section 6.4.4.5.
7.1.8.6 Properties & Options
For the definition of a new routing decision for pedestrians the following
properties have to be set:
● Decision No.: Unique identification of the routing decision
● Decision Name: Label or comment
● Location: Number of the start area and name, if applicable
● Type: At present, either Static or Partial can be selected
In the Pedestrian Routes window, the following properties can be set:
● Start Area: Location of the routing decision
● Destination Area (only for partial routes): Number of the destination area
selected for the partial routing decision.
● Pedestrian Classes: From a drow-down list, select the pedestrian classes
to be affected by this routing decision. For multi-selection, press CTRL
while clicking the left mouse button.
● Route choice method (only for partial routes): From a drow-down list,
select the route choice method to be used by this routing decision. Set
the appropriate route choice parameters.
The following methods are provided:
- Static
- Travel time, cf. section 7.1.8.8
- Service point selection, cf. section 7.1.8.13
Properties of a route or partial route of pedestrians:
● Route No.: Unique identification of the route or partial route.
● Destination Area: Number of the destination area of the route or partial
route.
● Value per time interval (only for static routes and static partial routes):
From the ratio values of the routes, the relative flows are calculated
384 VISSIM 5.30-05 © PTV AG 2011