VISSIM 5.30-05 User Manual

11.17 Vehicle Input
Vehicle Input
This evaluation provides a log file (*.FHZ) of all vehicle input events (i.e.
when a vehicle enters the VISSIM network).
Definition
No additional definition required.
Configuration
No additional configuration required.
Results
This is the file format of an output file (*.FHZ):
► File title
► Path and name of the input file (File)
► Simulation comment (Comment)
► Date and time of the evaluation (Date)
► Version no. with Service pack no. and Build no (VISSIM)
► Data block:
- one data line for each vehicle entering the VISSIM network, and
- one column per parameter.
If a dynamic assignment vehicle starts from a parking lot, the number of the
parking lot is written to the column “Link” (not the link number) and zero to
the column “Lane”.
Example (*.FHZ file)
Table of vehicles entered
File: e:\programfiles\vissim520\example\manual.inp
Comment: Manual example
Date: Wednesday, May 2, 2009, 15:43:02
VISSIM: 5.20-00 [19022]
Time; Link; Lane; VehNr; VehType; Line; DesSpeed; CatTemp; CWTemp; DestPLot; Start Time;
0.1; 2008; 1; 1; 401; 218; 48.9; 20.0; 20.0; 0; 0.1;
0.1; 1001; 1; 2; 402; 101; 48.9; 20.0; 20.0; 0; 0.1;
1.2; 279; 1; 3; 100; 0; 49.1; 0.0; 0.0; 0; 1.3;
2.6; 273; 1; 4; 100; 0; 48.3; 0.0; 0.0; 0; 2.6;
3.6; 279; 1; 5; 100; 0; 51.1; 0.0; 0.0; 0; 3.7;
7.1; 274; 1; 6; 150; 0; 53.7; 0.0; 0.0; 0; 7.1;
9.2; 275; 1; 7; 100; 0; 51.0; 0.0; 0.0; 0; 9.2;
9.7; 279; 1; 8; 150; 0; 55.8; 0.0; 0.0; 0; 9.8;
...
User Manual © PTV AG 2011 555