VISSIM 5.30-05 User Manual

[ACTIVATION] ● Vehicle Classes: The detector
will recognize only vehicles that
are contained in at least one of
the selected classes.
● PT Lines: The detector will
recognize only vehicles of those
PT lines that are selected here.
A multi-selection is possible
using CTRL and mouse click.
Signal Controllers
● Departure Signal: The detector will detect a vehicle only in one of the
following cases:
- if the vehicle stops in the selected PT stop and the dwell time will
be finished after the given time (x seconds before departure) or the
total dwell time is shorter than the given time
- if the vehicle has already decided to skip that PT stop (in this case
the detector call is sent to the controller as soon as the vehicle
reaches the detector)
If the detecor is located on a link
which is to be used as pedestrian
area, and serves for push button
modeling for pedestrians, please
select Pedestrian class(es) and
define the Maximum speed, cf.
section 7.1.5.
User Manual © PTV AG 2011 287