VISSIM 5.30-05 User Manual

Define new
input of pe-
destrians
The Pedestrians Editor (Add-on)
Prior to the definition of pedestrian inputs at least one pedestrian
composition needs to be defined (similar to vehicle inputs, cf. section
7.1.6.1).
1. Double-click on the area where the new input of pedestrians is to be
defined. The Pedestrian Inputs window opens with the corresponding link
no.
2. If an input of pedestrians already exists, either change it or right click and
choose NEW to create a new row for this area.
3. Define the input properties, cf. section 7.1.7.2.
Edit data For volume changes:
1. Select the cell to change.
2. Type in the new volume and confirm with ENTER.
For composition changes:
1. Select the cell to change.
2. Press the button on the right to open the pull-down list.
3. Select the new composition from the list.
For further information and property changes please refer to section 7.1.7.2.
Copy &
Paste
data
Scale
Volume
Delete in-
put of pe-
destrians
In the Volumes/Compositions section, the COPY & PASTE commands (similar
to the Microsoft Excel method) are available through context menu. Data
exchange is permitted within the input window or from/to external data
sources (e.g. *.XLS or *.DOC files).
► COPY: Select a source cell or rectangular source region using
- SHIFT + cursor keys or
- mouse move while holding down left mouse button.
► PASTE: Select a destination region being
- congruent (identical dimensions) or
- larger than the source region (e.g. source 2x3, destination 6x6 or
10x15; not ok: 3x6 or 6x10).
Please disable display of either volumes or compositions before selection,
since only one data type can be copied/pasted.
Only values of visible columns are copied and pasted (not values that are
contained in hidden columns).
Select the cells with volume values to be multiplied by the user-defined
factor. Click SCALE VOLUMES in the context menu and enter the factor for
volume scaling.
1. Select the entire row(s) to be deleted by clicking on the row no. (on the
far left of the grid). Press CTRL simultaneously to select several rows.
2. Right click and choose DELETE from the context menu.
3. Confirm the upcoming message.
User Manual © PTV AG 2011 369