VISSIM 5.30-05 User Manual

11 Evaluation Types for Simulations of Vehicles
Selecting filters in Global Filter will allow you to set or reset all of the other
filters of that type at once (with the exception of Travel Time’s Location filter).
Each report will then contain the selections made in Global Filter. Changes to
the report filters will not affect Global Filters.
Time filters
Via Global you can set a single time interval which will be regarded for all of
the reports: Check the option Set values or All: .
For time interval definition, you need to uncheck the option Set values or
All: in the Global filter first. Then you need to check it again to use the
time interval settings for any other report.
If you click on the Time Period filter, a dialog appears and allows you to
manually enter the time period that you are interested in.
This dialog displays the times (in simulation seconds) of the first and the last
data recorded in your network.
574 VISSIM 5.30-05 © PTV AG 2011