VISSIM 5.30-05 User Manual

4 View Settings
4.1.3 Colors
model distribution which has been assigned to the vehicle type (3D) via
BASE DATA – DISTRIBUTIONS – 2D/3D MODEL….
- CONFIGURATION: Select the parameter for colored vehicle display,
enter the upper limit by class and set the color by class for display of
vehicles, cf. section 4.2.2.
- Interval defines that only every th frame of the visualization will
be updated. The default value is 1 and corresponds to a frame
update at every simulation time step.
● Aggregated values: If this option is active, each link segment is colored
instead of individual vehicles. For that the color code representation of
the parameter selected via CONFIGURATION is used. Different segment
lengths can be defined for links and connectors and the display can be
checked or unchecked, cf. section 6.3.1.2 and 6.3.2.
- CONFIGURATION: Select the parameter for colored aggregate value
visualization, enter the upper limit by class and set the color by class
for colored display of compiled data, cf. section 4.2.3.1.
● No visualization: Neither individual vehicles nor aggregated values are
displayed during the simulation. Use this option to maximize simulation
speed.
Click CTRL-Q to activate the next of these three display options during a
simulation (Individual vehicles / Aggregated values / No visualization).
The visualization of traffic requires a substantial amount of computing time.
Turning off the visualization increases the simulation speed. Another option
to increase the simulation speed is to increase the interval of frame
updates for the visualization (Interval).
VIEW - OPTIONS... - [COLORS] contains color options for scene and network as
well as options for bitmap display.
68 VISSIM 5.30-05 © PTV AG 2011