VISSIM 5.30-05 User Manual

Zoom in
the signal
program
display
Signal Controllers
For more precise changes to individual signal times you may zoom into a
user-defined section of the displayed signal program (for example in case
of controller frequency = 10 with possible switch points every 1/10
seconds).
Follow the steps outlined below:
1. Mark a row in the table.
2. Click the graphical display area of the selected
row.
The pointer appears as hand.
3. Click the scroll wheel in the graphical display area of the selected row to
extend the time axis display next to the click position.
4. Click the scroll wheel again to reset the zoom.
Toggle between the two states.
6.7.4.7 Editing Interstages (VISSIG add-on)
Interstages can only be created via entry Stage sequence editing in the
navigator (cf. section 6.7.4.5). Via entry Interstages in the navigator, they can
be duplicated, edited, exported and deleted.
Right-click in the list calls the context menu. It provides the following
functionality:
► DUPLICATE creates a new interstage with the properties of the selected
one but a new no.
► EDIT allows for editing the data of the selected interstage
► DELETE removes the selected entry from the list
► EXPORT allows for image file export of the selected interstage
User Manual © PTV AG 2011 323