VISSIM 5.30-05 User Manual

nodes)
Analyzer Report
Reports Network performance, Delay, Movement Group Delay,
Travel Times, Travel Time Delay, Queue Lengths, Volumes
(cf. section 11.24.4)
Filters are criteria that allow you to trim your selections from all the data
collected for Analyzer from the entire network to just the information you are
interested in. This is done by adding clauses to the database query when
Analyzer starts processing the reports. These filters include:
Nodes The nodes (Intersections) or Travel Time Segments that are
contained in the network.
Vehicle
Types
Random
Seed
The types of vehicles in the network that generate data.
(Note: If a vehicle is not listed in the filter, it generated no
data which is usable by Analyzer reports.)
The Random seed values associated with individual
simulation runs.
Time Period Allows user to select a time period in the simulation that they
are interested in seeing data for.
The Time Period filter works two ways:
► If the data is recorded at a particular time, the Time
Period filter will select only the data that falls within the
period you selected, or
► if the data occurs within a range of time, the Time Period
filter will only select the data whose start and end time
fall within the period you selected.
Measures Travel time measures defined in the network.
(Selection refers only to the Travel Times Report, since
nodes are evaluated in a different manner.)
Movement
Group Delay
You can select groups of turn volumes and groups of vehicle
types. The report logs the delays for each combination.
(Selection refers only to the Movement Group Delay Report)
By default, Analyzer automatically selects all the objects in the filter. This is
indicated above the filter selection window by a checkbox. To select
individual objects in the filter, uncheck the checkbox and make your
selections.
In each filter you can select multiple adjacent items using SHIFT + CLICK or
click & drag. You can also select non-adjacent items by using CTRL + CLICK.
User Manual © PTV AG 2011 573