VISSIM 5.30-05 User Manual

11.21 Paths Evaluation
Paths Evaluation
The Paths Evaluation file (*.WGA) can only be used with the Dynamic
Assignment add-on. It is intended to produce results in a user-definable
format for a Dynamic Assignment run.
Definition
No additional definition required.
Configuration
For configuration, the Path Evaluation Configuration window can be
accessed, if option Paths (Dynamic Ass.) is ticked in the Offline Analysis
(File) window (EVALUATION – FILES… - [VEHICLES])
Path evaluation can be output to file (*.WGA) and to a Database table, see
Table name, if option Database is checked.
Selected parameters
are displayed within the
list box to the left.
The current selection
can be edited by
pressing the and
buttons.
The configuration will
be saved to an external
file (*.WGK).
● Database: If active, evaluation output is directed to a database to the
specified Table Name (rather than to an ASCII text file). The table name
must not be used for any other VISSIM database evaluations. In order to
use the database output the database connection needs to be configured
(cf. section 10.1.3).
Filter
Additionally, the filter information needs to be configured. This is done in the
Path Evaluation Filter window which is accessed by selecting Paths
(Dynamic Ass.) in the Offline Analysis (File) window (EVALUATION – FILES...).
User Manual © PTV AG 2011 561