VISSIM 5.30-05 User Manual

Split 1. Select link.
2. Choose EDIT - SPLIT LINK (or default shortcut F8)
3. Left click on the split position.
4. Specify data:
- Choose whether a connector should be
created automatically or not.
- Optionally the exact split position and the
number of the new link can be specified.
5. Confirm with OK.
Edit
data
Network Coding
Single-select: Double click on the link calls the Link Data window, cf. section
6.3.1.2.
Multi-select: Right-click outside of
the VISSIM network calls the Link
Attributes (Multiselection) window
for editing data of active links and
connectors, cf. section 6.3.1.2
User Manual © PTV AG 2011 191