VISSIM 5.30-05 User Manual

Priority
Rule
window
The Pedestrians Editor (Add-on)
For definition of priority rules for pedestrians and subsequent changes to
their properties please refer to the priority rules for signal-controlled
vehicular traffic, cf. section 6.6.1.
Actually, conflict areas are recommended for modeling. If these do not
return the expected results, the experienced user can model priority rules.
If the stop line (or one of the conflict markers) is located on a link which is
used as pedestrian link, pedestrian classes are provided for selection
instead of vehicle classes.
For a priority rule that has already been defined, follow the steps outlined
below to configure either combination pedestrians x vehicles, vehicles x
pedestrians or pedestrians x pedestrians:
► Select the link where the cross section to be edited is located.
► Open the Link attributes window, cf. section 6.3.1.2
► Click option Use as pedestrian link:
- If this option is checked, pedestrian classes will be provided for
selection at this cross section.
- If this option is unchecked, vehicle classes will be provided for
selection at this cross section.
User Manual © PTV AG 2011 363