VISSIM 5.30-05 User Manual

12 Dynamic Assignment
3. Select option Dynamic Assignment.
4. Check option Import routing and select the *.ANMROUTES file that
was exported from VISUM.
5. Click IMPORT.
6. Confirm OK.
This messages indicates that
no errors occured during import.
VISSIM creates a path file *.WEG that stores the routes calculated in VISUM.
The filename is derived from the PATH FILE entry in the Dynamic Assignment
window. From an existing path file with the same filename, a backup copy
*.BAK is generated prior to overriding. The route import does not change
VISSIM network data.
The distribution of the zone’s origin flow to the zone’s parking lots in
VISSIM regards only the relative flows entered in VISSIM. It does not
depend on the distribution to the origin zone connectors during the VISUM
assignment. The result of the VISUM assignment is only used for the
distribution of vehicles from VISSIM parking lots to the routes that were
found in VISUM that lead to the particular destination parking lot.
652 VISSIM 5.30-05 © PTV AG 2011