VISSIM 5.30-05 User Manual

6 The Traffic Network
Adaptive ANM Import uses all of the parameters provided for initial ANM
Import (cf. section 6.2.1.4) and additionally two more options:
● Delete omitted objects: During further network processing in VISUM
network objects could have been removed from the initial VISUM
network after VISUM export to *.ANM file and ANM Import in VISSIM.
Thus, a new *.ANM file provided for Adaptive Import in VISSIM might
contain only part of the network objects which originally had been
imported into VISSIM. This way, missing objects could occur during
Adaptive Import of an abstract network model.
If this option is active, these objects missing in the new *.ANM file are
also removed from the VISSIM network and so are VISSIM network
elements which were automatically generated from these objects.
If this option is not checked, this portion of the VISSIM network will
remain unchanged.
● Complete routes after Import: If this option is active, VISSIM will
automatically complete existing routes in the VISSIM network which were
corrupted by adaptive ANM Import.
The filename you enter for the *.INP file will also be used for the *.PANM
file and the *.PANMROUTES file.
6.2.1.6 Hermes XML Import
Via menu FILE – IMPORT – HERMES XML, you can start the import of network
data in XML format. The data is converted into ANI data format and will be
stored as *.ANI data file with the given filename in the same folder.
174 VISSIM 5.30-05 © PTV AG 2011