VISSIM 5.30-05 User Manual

Evaluation Types for Simulations of Pedestrians
Parameter Definition Column Header
z
Total delay time Total time delay [s] on
measurement area(s) (of
pedestrians who left measurement
area(s) during aggr. interval)
Total distance Total distance traveled on
measurement area(s) (of
pedestrians who left measurement
area(s) during aggr. interval)
Total dwell time Total time [s] spent on
measurement area(s) (of
pedestrians who left measurement
area(s) during aggr. interval)
Total gained time Total time gain [s] on measurement
area(s) (of pedestrians who left
measurement area(s) during aggr.
interval)
TimeDelay
TotalDist
TotalDwell
TotalGain
Example: Compiled data file *.MESP
Underneath the file header, the evaluated areas are listed.
The second line contains just the number of the particular area evaluation
(Note: not the number of the defined measurement area(s)) underneath the
particular block of columns.
Another line is added for each aggregation time interval. Each of those
additional lines contains the data gained by area evaluation during this
interval.
Area evaluation (compiled data)
File: D:\Programme\PTV_Vision\VISSIM530\Examples\Training\Pedestrians\HotelRimea.inp
Comment:
Date: Friday, October 23, 2009, 1:41:30 pm
VISSIM: 5.20-04* [20767]
Area evaluation 1 : Measurement area(s) 1
Area evaluation 2 : Measurement area(s) 2
Area evaluation 3 : Measurement area(s) 3
AvgXOri : Average of x values of orientation vectors
AvgYOri : Average of y values of orientation vectors
Density : Density of pedestrians on measurement area(s) [ped/m²]
vDes : Desired speed [km/h]
EvalNo : Area evaluation number
NumPeds : Number of pedestrians on measurement area(s)
SourceVol : Number of pedestrians who left the measurement area(s)
User Manual © PTV AG 2011 405