VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
All routes of those routing decisions being selected in the list of routing
decisions are listed in the particular Route List.
All routes being selected in the Route List are automatically highlighted as
yellow bands in the network display.
► To select a single route or routing decision in the list, click in the grey
cell to the left of the particular line. The previously selected route or
routing decision is automatically deselected.
► To (de)select multiple routes or routing decisions, press CTRL or SHIFT
simultaneously.
Delete In the Pedestrian Routes window:
► Select one or several routing decisions or routes
► Press DEL or click DELETE in the context menu
With a routing decision, all of its routes are deleted.
Edit route
alignment
Edit
listed data
A pedestrian route is graphically represented by a yellow line spanning
between either two successive strategic points of the route. The center
point of each yellow line is marked by a smaller yellow dot. The dot does
not represent an intermediate stop but serves for editing the course of the
route:
► Left-click and drag the yellow handle onto another area while keeping
the mouse-key pressed. The currently selected area is highlighted on
screen.
► Release the mouse-key if the correct area is marked.
► In case of several overlapping areas hit TAB as often as necessary to
select the desired area.
On the chosen area, a new strategic intermediate point will be placed that is
marked by a blue dot.
The start can neither be placed on a stair or ramp nor on links that have
been defined as areas. Just areas can carry this information.
Intermediates stops and the ends of pedestrian routes can be placed on
areas and ramps/stairs.
In each of the lists in the Pedestrian Routes window,
► right-click calls a context menu providing DELETE to remove the
selected row(s) from the list,
► editable properties can be edited directly in selected cells.
386 VISSIM 5.30-05 © PTV AG 2011