VISSIM 5.30-05 User Manual

VISUM VISSIM
Blocked Turn for
TSys
Data Import/Export
Right-turn on red movements are created with stop
sign, signal head and conflict area.
Multiple lane turns from a lane to several lanes on
the same link are permitted.
Connector closures
Note:
In VISSIM, the lane closure for a specific Public
Transport TSys is applied only if in VISUM a vehicle
combination has been defined with this TSys
assigned.
Zone and Connector ► Parking lots (for dynamic assignment) or
► vehicle input and static routing decision (for
static routing).
For VISSIM zone connectors cf. below
Link attribute Type
On connectors from/to VISSIM links, that represent
zone connectors in the ANM file exported from
VISUM, conflict areas are created, so that the
vehicles entering/leaving the network via these links
do not interfere with “normal” traffic.
VISSIM links and connectors representing zone
connectors in the ANM file from VISUM are created
with option „Visualization“ unchecked by default.
Thus vehicles driving on them are invisible.
A Link behavior type is created accordingly
(No./Name) and one of the automatically created
Link display types is allocated:
► ANM Default
► Pedestrian Crosswalk (1 m before stop line)
► Zone Connector (additional link)
For connectors between links, link behavior type
and link display type of the FromLink are allocated.
Link attribute v0-PrT Desired speed distribution assigned to a desired
speed decision
Stop points PT Stops whose length and type (Street/Lay-by)
result from the parameters that had been set in
VISUM for ANM Export of public transport stop
points.
Public transport
vehicle journeys (in
the exported time
period)
Bus/Tram Lines
User Manual © PTV AG 2011 171