VISSIM 5.30-05 User Manual

Data Import/Export
Specify the paths for input files and output files.
● Import network data: If this option is active, path and file name of the
ANM file to be imported as abstract network model have to be entered.
Import network data: If this option is not active, you may - by activating
only option Import routing - force repeated import of just the routing
data you had imported with the abstract network model initially.
● Import routing: If this option is active, do the following:
- Chose whether routing data has to be imported as Static Routing or
for further use in Dynamic Assignment.
- For Dynamic Assignment: Enter the evaluation interval, if applicable.
Import routing: If this option is not active, only the abstract network
model will be imported.
ANM Import creates a network file which includes the *.ANM file data. By
this, your currently loaded network could be overwritten or deleted.
If the option Static Routing is selected with the initial import of the network
data, no parking lots (zone connectors) will be created.
Thus, the adaptive routing import for dynamic assignment is not possible
subsequently.
For future adaptive ANM Import a name for the output file *.INP is required.
The files *.PANM and *.PANMROUTES are automatically copied to the
folder which has been specified for the *.INP file.
User Manual © PTV AG 2011 169