VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
The filter information is stored in a filter configuration file *.PIL.
Results
The pedestrian protocol (*.PP) consists of the following:
► File title
► Path and name of the input file (File)
► Simulation comment (Comment)
► Date and time of the evaluation (Date)
► Version no. with Service pack no. and Build no. (VISSIM)
► Brief description of output parameters
► Data block
The pedestrian record file can contain any of the parameters listed below.
The table also includes the abbreviations that will be used within the
pedestrian record file.
Generally, current unit settings for (short/long)distance/speed/acceleration
under VIEW - OPTIONS - [LANGUAGE &UNITS] are regarded for evaluation data
output.
Please note: The units of those parameters with the particular unit
mentioned in the column header abbreviation will not change, for example
V_mps.
In contrast, the output of the speed in the v column, for example, regards
whether the metric or the imperial unit has been selected.
Parameters (such as TotalDist) which can be output with long length and
with short length simultaneously, always have the particular length in the
column header.
For parameters which are returned according to the current Units settings
(either metric or imperial) the current selection is added to the name of the
parameter in the Pedestrian protocol - Configuration window and will be
displayed in the Information line after mouse-click.
Parameter Definition Column Header
Construction
Element
Current
destination
Desired speed
[km/h]
Desired speed
[m/s]
Number of construction element ConstrElem
Number of current destination
(construction element)
CurrentDest
Desired speed [km/h ] vDes
Desired speed [m/s] vDes_mps
Height Pedestrian height [m] Height
Length Pedestrian length [m] Length
410 VISSIM 5.30-05 © PTV AG 2011