VISSIM 5.30-05 User Manual

4 View Settings
Mast
Double click on the 2D representation of the signal opens the Mast
Properties window:
● ID (in window title, read-only): Shows the mast identification no.
● Style: Appearance of the mast.
● Height: Mast height.
● Arm length: Length of the currently selected arm.
● Diameter: Mast diameter.
● Z-Position: Charted elevation of the mast position, (> 0 e.g. for masts on
bridges).
● ADD ARM: Creates a new arm and opens the Arm Properties window.
● ADD SIGNAL: Creates a new signal head that is attached directly to the
mast (not to an arm) and opens the Signal Head Properties window.
● ADD SIGN: Creates a new sign that is attached directly to the mast (not to
an arm) and opens the Sign Properties window.
● ADD LIGHT: Creates a new arm with the style Light.
● FLIP ALL: Toggles the direction of the arm on the mast accordingly for
right-hand traffic or left-hand traffic.
The following buttons are enabled only if either an arm, a signal head or a
sign is selected:
90 VISSIM 5.30-05 © PTV AG 2011